Location: Houston, Texas Electrical Engineer. Project management, coordination and design services for CCTV, local area network nodes, crash fire rescue, and fiber optic upgrades and additions. The fiber optic upgrades involved extending the existing backbone fiber to several locations throughout the facilities. The local area network nodes were interfaced with the existing WAN to complete … Read More
Location: Houston, Texas Provided electrical, security and communications engineering services. The project scope included designing two (2) new generator buildings to replace five (5) existing generator buildings. New power will be distributed throughout the airfield for lighting, signage and Nav-Aids from the new generator buildings. New regulators will be installed. The existing S1 cut-outs will … Read More
Location: Fredericksburg, Texas Provided the electrical airfield engineering services for replacement of the existing MIRL’s and Threshold lights, infrastructure, regulator and controls. Also included was replacement of the primary windcone with new internally illuminated windcone and addition of new supplemental windcone. A new helipad was added to an extended apron with taxiway edge lights with … Read More
Location: Fort Worth, Texas Provided the electrical design for modifications to the signage, beacon and lighting control system. The signage design included replacement of approximately 45 existing airfield guidance signs with new guidance signs. This improvement will occur over 2 phases. Phase 1 will include the replacement of approximately 20 signs and phase 2 will … Read More
Location: Conroe, Texas Provided the electrical airfield engineering services for the airfield project. The project consisted of a 1500 LF runway 14 extension and parallel taxiway, reconstruction of the existing T/W ‘A’, reconstruction of T/W ‘D’ to make true parallel to r/w 1-19, relocation and addition of existing 2-PAPI and new 4-PAPI and FAA navigational … Read More
Location: Galveston, Texas Provided electrical engineering services for replacement of the airfield lighting, Nav-Aids and Vault Building, all of which were damaged during Hurricane Ike. The new vault building was located at an elevation at 16’ above BFE and consisted of a 120KVA generator, 6 regulators, new Airfield Lighting Control System with fiber backbone. All … Read More
Location: Dallas/Fort Worth, Texas FY2013 – Electrical ImprovementsProvided the electrical engineering services for the upgrade to the existing Surface Movement Guidance Control System (SMGCS) equipment including replacement of all in-pavement and elevated Runway Guard Lights (RGL’s) with new LED fixtures and the addition of a new windcone. In addition, all RGL regulators were replaced, RFID … Read More
Location: Houston, Texas HAS 522F – Electrical Vault and Security Fence for new Runway 8L-26R – GBIATelecommunications Engineer. Provided the telecommunication engineering services to relocate all existing communications systems from the existing North Vault to the New North Vault. The communication systems include security, Airfield lighting, data, telephone, fire alarm and remote monitoring systems. New … Read More