Runway 17R/35L Rehabilitation – DFW International Airport

Location: Dallas/Fort Worth, Texas Airfield Electrical Engineering for various electrical and FAA systems supporting the 13,400’ Runway 17R-35L. Our scope of work is broken out into the various subsystems shown below: Runway Status Lights – The scope of work here was to replace all the Takeoff Hold Lights (THL’s) and Runway Entrance Lights (REL’s) supporting … Read More

Runway 18R/36L Rehabilitation – DFW Airport

Location: Dallas/Fort Worth, Texas Airfield Electrical Engineering for the Reconstruction of the 13,400’ Runway 18R-36L. The scope of work was to redesign the Airfield Electrical System from parallel Taxiway C, to parallel Taxiway E, including all cross Taxiways in between. The Runway design included installing new lights along the entire length of the runway, including … Read More

United Airlines Aircraft Maintenance Complex Relocation & Expansion – IAH

Location: Houston, Texas Provided the IT and Security System Engineering Services. Divided into eight design elements with both new and renovated spaces, the project includes multiple facets including: construction of a new 185,275 sqft wide-body line maintenance hangar, renovation of an existing 72,000 SF structure into a narrow body heavy maintenance hangar, a new bulk … Read More

Terminal C North – George Bush Intercontinental Airport

Location: Houston, Texas Provided the Telecommunication and Security System Engineering.  The project was for construction of a 250,000SF two level, 12 narrowbody with 2 wide body gate concourses between Terminal B Flight Station 5 and existing Terminal C North.   The project renovated 59,400SF of the BD Connector and 3,500SF of the Terminal B Bus Station.  … Read More

United Airlines East Aircraft Maintenance and GSE Complex – LAX

Location: Los Angeles, California Provided Security and IT engineering services for the East Aircraft Maintenance and GSE Complex including a new east maintenance complex consisting of narrow body and wide body hangars, facilities and aircraft maintenance of approximately 452,000SF. Also Included are a parts warehouse, an engine buildup shop and a ground service equipment maintenance … Read More

United Airlines Los Angeles International Airport Terminal Redevelopment

Location: Los Angeles, California Telecommunication System Engineering.  This project was for complete renovation of all United Airline facilities at LAX, including refurbished hold rooms with new GIDS, podiums and backscreens, new jet bridges for all 23 gates, new automated aircraft parking system, temporary and new United Club, United break room, check-in counters, baggage claims, GIDS, … Read More

George Bush Intercontinental Airport Wide Security System Design (HAS 612Y)

Location: Houston, Texas Security System Services. This project included an airport wide security system design and phasing for the transition of the existing access control system to a new access control system. The scope of the project included five terminal buildings including associated concourses, flight stations, bus stations, train stations, parking garages and areas, AOA … Read More

George Bush Intercontinental Airport Continental Airlines Cargo Facility (HAS 611)

Location: Houston, Texas Telecommunications and Security System Engineer. Provided the telecommunication and security system engineering services for a new 114,500 sf cargo building. The building consists of two levels with storage space, kennel, mail sort, administration offices and conference areas. The building was set so that half of the area was in the AOA. The … Read More

George Bush Houston Intercontinental Airport – FIS Cargo One-Stop Facility (HAS 605B)

Location: Houston, Texas Ferguson Consulting, Inc. provided the security system and telecommunications design for the new facility. The new facility was located remotely from the existing terminal buildings. It consisted of 37,800 square feet of areas including laboratories, collection rooms, inspection/treatment areas, chamber fumigation rooms, chemical treatment rooms, office areas, support spaces and other rooms. … Read More

George Bush Intercontinental Airport Terminal ’C’ Concourses (HAS 490D)

Location: Houston, Texas Electrical Engineer. Provided the security system design for the complete upgrade of the Terminal ’C’ North and South Concourses. The facility is approximately 600,000 square feet and includes airline departure areas, airline operation areas, maintenance areas, baggage areas and vendor areas. The upgrades included replacing existing security components and providing new security … Read More