Location: Houston, Texas Electrical Engineer. Designed the electrical requirements for 35 new bus shelters to be located in the Uptown Area of Houston, Texas. The shelter design included uplighting for a nighttime glow, lighting controls and disconnect. The site electrical requirements included panelboard, controls, disconnect conduit and cabling to connect to existing landscaping or other … Read More
Location: Houston, Texas Provided the electrical engineering for beautification of buffalo bayou from Bagby to Sabine. The project consisted of the addition of lighted walkways, lighted bridge over the bayou, under bridge lighting, lighted bayou entrances and stairways. The electrical scope consisted on first, second and third order lighting, four points of electrical services, bridge … Read More
Location: Houston, Texas Provided the electrical engineering and closed circuit television design services for a new tollway facility located on Fort Bend Parkway. The facility consists of one Automatic Coin Machine (ACM)/EZ tag lane and two EZ tag only lanes with future expansion to include an additional ACM/EZ tag lane. The electrical scope included the … Read More
Location: Hallettsville, Texas Provided the electrical engineering for the renovation of a nine area block located in Downtown Hallettsville. The electrical scope included the design of new architectural street lighting to achieve a minimum foot-candle level of 0.2fc and a average level of 0.5fc. New electrical service was required at four locations in downtown and … Read More
Location: Houston, Texas Provided the electrical engineering for a new parkway extending the existing Ft Bend Parkway at Chasewood to US Hwy 90 for approximately 29,600 lineal feet. The electrical scope includes roadway, ramp and underpass lighting design. Also included were several high mast fixtures.
Location: Houston, Texas Provided the electrical engineering services for the East Belt of the Sam Houston Tollway. The design included the addition of a new 6-lane toll plaza consisting of three (3) AVI, two (2) ACM and one (1) manned booth, five (5) sets of entrance/exit ramp toll plazas consisting of EZ TAG and ACM … Read More
Location: Houston, Texas Provided the electrical engineering for the project. The building consisted of 4 stories with a total of 98,000 square foot. The construction cost was estimated at 18 million dollars. The building included classrooms, lecture halls, seminar rooms, faculty/administrative offices and associated support and circulation spaces. The electrical system included distribution and branch … Read More
School of Nursing and Student Community CenterHouston, TexasElectrical Engineer. Provide telecommunication engineering services for a 194,000 square-foot high rise building. The building is very unique in that it is all raised flooring. The building will be a certified LEED building. LEED certification is for very high energy efficiency and environmental friendliness. The telecommunication services include … Read More